Connectors compared
The connector families of conductive charging side by side: where they are used, what they carry, how the car and charger detect the plug and read the cable, and how they lock.
Overview
| Connector | Region | AC or DC | Pins | Typical max voltage | Typical max current | Communication |
|---|---|---|---|---|---|---|
| Type 1 (SAE J1772, IEC 62196-2) | North America, Japan, formerly Korea | AC single phase | 5: L1, L2/N, PE, CP, PP | 240 V | 32 A (IEC); up to 80 A (J1772) | CP PWM; ISO 15118 over PLC optional |
| Type 2 (IEC 62196-2) | Europe and most of the world outside the Americas, China and Japan | AC single or three phase | 7: L1, L2, L3, N, PE, CP, PP | 400 V three phase (480 V rated) | 63 A three phase, 70 A single phase | CP PWM; ISO 15118 over PLC optional |
| Type 3 (IEC 62196-2, historic) | Italy and France | AC | Variants 3A and 3C with different pin sets | see note | see note | CP PWM |
| CCS1 (Combo 1) | North America, Korea | DC (inlet also takes Type 1 for AC) | Plug: PE, CP, PP, DC+, DC- | 1 000 V | about 200 A uncooled, up to about 500 A cooled | PLC on CP: DIN SPEC 70121, ISO 15118-2, ISO 15118-20 |
| CCS2 (Combo 2) | Europe, Australia, India and others | DC (inlet also takes Type 2 for AC) | Plug: PE, CP, PP, DC+, DC- | 1 000 V | about 200 A uncooled, up to about 500 A cooled | PLC on CP: DIN SPEC 70121, ISO 15118-2, ISO 15118-20 |
| CHAdeMO | Japan, older cars worldwide | DC | 10, of which 2 for power, PE and 7 for signals | 500 V (1 000 V in version 2) | 125 A common, up to 400 A in version 2 | CAN at 500 kbit/s plus analogue lines |
| GB/T AC (GB/T 20234.2) | China | AC single or three phase | 7: L1, L2, L3, N, PE, CC, CP | 440 V | 32 A (63 A in later editions) | CP PWM, CC resistor for the cable |
| GB/T DC (GB/T 20234.3) | China | DC | 9: DC+, DC-, PE, S+, S- (CAN), CC1, CC2, A+, A- (12 V auxiliary) | 750 V (1 000 V in the 2015 edition) | up to 250 A | CAN at 250 kbit/s (GB/T 27930) |
| NACS (SAE J3400) | North America | AC and DC on the same power pins | 5: two power, PE, CP, PP | 1 000 V DC (277 V AC) | about 80 A AC; DC depends on the cable | PLC on CP, the same protocols as CCS |
| MCS (IEC TS 63379, SAE J3271) | Heavy vehicles, worldwide | DC | Two DC power pins, PE and signal pins | 1 250 V | up to 3 000 A | ISO 15118-20 over 10BASE-T1S Ethernet |
| ChaoJi (GB/T 2023, CHAdeMO 3) | China, planned in Japan | DC | Compact plug, see note | 1 500 V | about 600 A | CAN (GB/T 27930:2023 and CHAdeMO 3) |
The voltages and currents are typical design limits of the connector families; real cables and chargers are often rated lower. The Type 3 variants, the ChaoJi pin set and the current NACS DC and AC ratings are to be checked against the documents named in the sources.
Directive 2014/94/EU named Type 2 for AC and Combo 2 for DC as the common connectors for public charging in the EU, which ended the use of Type 3 for new installations there.
Pilot and proximity by family
- Type 1, Type 2, CCS1, CCS2 and NACS share the IEC 61851-1 Control Pilot. On the DC combos and NACS the pilot also carries the PLC signal of ISO 15118-3.
- Type 2 (and CCS2): PP carries a coding resistor to PE in the plug. The charger reads it from a detachable cable to learn its rating; the car reads the same resistor to detect the plug and block driving away.
- Type 1 (and CCS1, NACS): PP is read by the car only. A switch in the plug, opened by the latch button, changes the resistance so the car sees the user unlatching and can stop the current before the contacts separate.
- GB/T AC and DC use CC (connection confirmation) lines with resistors in both plug and inlet in place of PP; GB/T DC has two, CC1 read by the charger and CC2 read by the car.
- CHAdeMO has no PWM pilot. Two start signal lines, a charging enable line from the car and a proximity line work together with CAN.
- MCS replaces the PLC link with a separate Ethernet pair; its pilot function is for presence and safety, not for carrying data.
For Type 1, the pull-up and resistor values in the car and the plug, and the voltages the car sees latched, unlatched and unplugged, are given in SAE J1772 and are not reproduced here.
Reading the cable rating from PP
A detachable Type 2 cable tells the charger its current rating with a single resistor between PP and PE. The ranges and the analyzer's handling of a reading between two classes are described on the power and cable page; PP-01 warns when a logged reading names no class.
A tethered charger knows its own cable and may skip the PP reading. The car still uses the resistor on its side to detect the plug, so a cable with a broken PP wire can charge on one car and not on another.
Locking
| Family | Who locks | What the capture shows |
|---|---|---|
| Type 2 socket on the charger | The charger locks the plug in its socket before closing the contactor; the car locks its inlet | A delay between state B and the start of PWM or of SLAC while the actuator moves |
| Type 1 | Mechanical latch only; the car may add an inlet lock | Unlatching shows as a PP change and an early stop by the car |
| CCS1, CCS2, NACS DC | The car locks the connector in its inlet before the charger energises the output | A failed lock usually stops the car before or during CableCheck |
| CHAdeMO | The lock is in the charger's connector | The charger unlocks only after its output voltage has dropped |
| GB/T DC | Electronic lock in the charger's connector | The charger checks the lock before the insulation test |
Temperature sensors
At high current the contact resistance of a worn or dirty pin heats the connector. DC plugs for high power therefore carry temperature sensors near the DC contacts, read by the charger, and many car inlets carry their own, read by the car. Both sides derate rather than stop at first.
- Charger side: a falling
EVSEMaximumCurrentLimitin the charge loop, withEVSECurrentLimitAchievedset, during a long session. - Car side: a falling
EVTargetCurrentorEVMaximumCurrentLimitthat does not follow the state of charge. - On AC the car cannot tell the charger about a hot inlet except by drawing less current, which the PWM does not reflect.
Sources
- IEC 62196-2, AC connectors, types 1, 2 and 3
- IEC 62196-3, DC and combined connectors, configurations AA to FF
- SAE J1772, Type 1 and CCS1
- SAE J3400, North American Charging System
- GB/T 20234.2 and GB/T 20234.3, Chinese AC and DC connectors
- CHAdeMO specification, connector and signal lines
- IEC TS 63379 and SAE J3271, Megawatt Charging System
- Directive 2014/94/EU, common connectors for the EU