NACS, MCS, OCPP and friends

Standards people ask about that are not separate modules in this tool, and why.

Covered through other modules

  • NACS / SAE J3400: a connector and power class. The communication is ISO 15118-2, ISO 15118-20 or DIN SPEC 70121, which the tool reads.
  • MCS (megawatt charging for trucks): uses ISO 15118-20 over a different physical layer (10BASE-T1S Ethernet instead of PLC). A capture of its IP traffic is read by the ISO 15118-20 module.

Out of scope

  • OCPP runs between the charger and its backend, not between car and charger, so a charging cable capture does not contain it.
  • Tesla's proprietary pre-NACS CAN protocol is undocumented.
  • ChaoJi (GB/T 2023 and CHAdeMO 3) is not implemented yet.

Sources

  • SAE J3400, North American Charging System connector
  • SAE J3271 and IEC TS 63379, Megawatt Charging System, drafts
  • OCPP 1.6 and 2.0.1, Open Charge Alliance