A short history of conductive charging standards
How the connectors and protocols in today's captures came to be, from the first SAE J1772 to ISO 15118-20, NACS and megawatt charging, and why older protocols stay in the field.
Timeline
| Year | Event |
|---|---|
| 1996 (verify) | First edition of SAE J1772 for conductive charging in North America, with a connector unlike today's |
| 2001 (verify) | SAE J1772 revision built around the rectangular Avcon connector; first edition of IEC 61851-1 |
| 2009 (verify) | Mennekes proposes the seven contact connector that becomes IEC Type 2 |
| 2010 | SAE J1772 revision with the round five contact connector (later IEC Type 1); CHAdeMO Association founded; second edition of IEC 61851-1 |
| 2011 | IEC 62196-2 first edition, standardising the Type 1, Type 2 and Type 3 AC connectors; first GB/T 20234 and GB/T 27930 (verify) |
| 2012 | DIN SPEC 70121 first edition; SAE J1772 revision adds the Combo 1 DC coupler (CCS1) |
| 2013 | ISO 15118-1 (general information and use cases) |
| 2014 | ISO 15118-2; revised DIN SPEC 70121; IEC 61851-23 and IEC 61851-24 (DC stations and their communication, covering CHAdeMO, GB/T and CCS); IEC 62196-3 (DC couplers); Directive 2014/94/EU makes Type 2 and Combo 2 the reference connectors for public points in the EU |
| 2015 | ISO 15118-3 (PLC physical and data link layer); CharIN e.V. founded; revised GB/T 18487.1, GB/T 20234 and GB/T 27930, in force from 2016 |
| 2017 | Third edition of IEC 61851-1 |
| 2018 (verify) | ISO 15118-4 and ISO 15118-5, the conformance tests for parts 2 and 3 |
| 2020 (verify) | CHAdeMO 3.0 and the ChaoJi connector, developed jointly with China |
| 2022 | ISO 15118-20 published; Tesla opens its connector design as NACS; CharIN presents the MCS connector (verify) |
| 2023 | Regulation (EU) 2023/1804 (AFIR) adopted to replace the directive; SAE J3400 published as a Technical Information Report (verify); second edition of IEC 61851-23 (verify) |
| 2024 | AFIR applies from 13 April 2024; SAE J3400 published as a Recommended Practice (verify) |
| 2025 (verify) | SAE J3271 and IEC TS 63379 for the Megawatt Charging System |
Rows and entries marked verify are dates to confirm against the publishers' catalogues before they are quoted.
Why two generations of ISO 15118
ISO 15118-2 was written between about 2010 and 2014 for unidirectional AC and DC charging with either external identification or Plug and Charge. Its security uses TLS 1.2 with secp256r1 and authenticates only the charger in TLS. Power flows follow schedules the charger offers; there is no standard way to discharge the battery into the grid, and one car holds one contract.
ISO 15118-20 (2022) is a new message set with its own namespaces rather than an amendment, so the two do not interoperate on the wire: the app handshake decides which one a session speaks, and many chargers implement DIN SPEC 70121, ISO 15118-2 and ISO 15118-20 side by side. It adds bidirectional power transfer, a dynamic control mode in which the charger steers the power, wireless and pantograph charging, several contracts per car, TLS 1.3 with mutual authentication, and larger keys (secp521r1 and Ed448). MCS builds on it.
Why DIN SPEC 70121 still matters
DIN SPEC 70121 is a DC only profile taken from a draft of ISO 15118-2 and published in 2012 as a DIN SPEC, a faster specification track than a full standard, so that the first CCS cars and chargers could ship before ISO 15118-2 was final. It supports external identification only and in practice runs without TLS.
- The first CCS generation of cars implements only DIN SPEC 70121, and cars are rarely updated in the field, so chargers keep it for the life of those cars.
- Many later cars still list DIN SPEC 70121 in supportedAppProtocolReq as a fallback, and some chargers pick it before ISO 15118-2.
- Its message set looks like the ISO 15118-2 DC set, but its state machine, timing and data types differ in detail, which is a regular source of interoperability faults at testivals.
Regional paths
| Region | AC | DC | DC communication |
|---|---|---|---|
| Japan | Type 1 | CHAdeMO | CAN, CHAdeMO protocol |
| China | GB/T 20234.2 | GB/T 20234.3 | CAN, GB/T 27930 (built on SAE J1939) |
| North America | Type 1 (SAE J1772), now also SAE J3400 | CCS1 and SAE J3400; CHAdeMO on older sites | PLC with DIN SPEC 70121, ISO 15118-2 or ISO 15118-20 |
| Europe | Type 2 | CCS2 (Combo 2); CHAdeMO on older sites | PLC with DIN SPEC 70121, ISO 15118-2 or ISO 15118-20 |
Japan and China chose CAN based DC protocols with separate DC connectors early. Europe settled on Type 2 for AC and, through the 2014 directive, Combo 2 for DC. North America standardised Type 1 and CCS1, then from 2022 moved towards the connector Tesla opened as NACS and SAE standardised as J3400; its communication is the same PLC stack as CCS. ChaoJi is the joint successor path of CHAdeMO and GB/T.
Sources
- Publication dates of the cited standards, ISO, IEC, SAE, DIN and SAC catalogues
- Directive 2014/94/EU, Alternative Fuels Infrastructure Directive (AFID)
- Regulation (EU) 2023/1804, Alternative Fuels Infrastructure Regulation (AFIR)