ISO 15118-2: the first generation application layer

The 2014 V2G message set for AC and DC charging with external identification (EIM) or Plug and Charge, carried as EXI over TCP or TLS 1.2.

Structure

  • Every message is a V2G_Message with a Header (SessionID, optional notification and signature) and a Body holding exactly one request or response.
  • Namespace urn:iso:15118:2:2013:MsgDef, announced in the app handshake with VersionNumberMajor 2.
  • Payment is either ExternalPayment (EIM: RFID card, app, free charging) or Contract (Plug and Charge with a contract certificate in the car).
  • Plug and Charge needs TLS 1.2; EIM may run over plain TCP.

AC session

  1. EV: supportedAppProtocolReq
  2. EV: SessionSetupReq, SessionID all zero; the response assigns one
  3. EV: ServiceDiscoveryReq, energy transfer modes and payment options on offer
  4. EV: ServiceDetailReq, optional
  5. EV: PaymentServiceSelectionReq
  6. EV: PaymentDetailsReq, Plug and Charge only
  7. EV: AuthorizationReq, repeats while EVSEProcessing is Ongoing
  8. EV: ChargeParameterDiscoveryReq, AC_EVChargeParameter; the response brings the SAScheduleList
  9. EV: PowerDeliveryReq, ChargeProgress Start with the chosen SAScheduleTupleID
  10. EV: ChargingStatusReq, repeats; the car closes the CP switch to state C
  11. EV: PowerDeliveryReq, ChargeProgress Stop
  12. EV: SessionStopReq, Terminate or Pause

DC session

DC replaces ChargingStatus with CableCheck, PreCharge and CurrentDemand, and adds WeldingDetection after PowerDelivery Stop: SessionSetup, ServiceDiscovery, PaymentServiceSelection, Authorization, ChargeParameterDiscovery (DC_EVChargeParameter), CableCheck, PreCharge, PowerDelivery Start, CurrentDemand in a loop, PowerDelivery Stop, WeldingDetection, SessionStop.

Renegotiation, pause and receipts

  • The charger asks for a new schedule with EVSENotification ReNegotiation; the car answers with PowerDelivery Renegotiate and a new ChargeParameterDiscovery, leaving the charge loop meanwhile. SQ-01 accepts that step back.
  • EVSENotification StopCharging asks the car to stop within the notification delay; SQ-09 checks the car reacts.
  • With ReceiptRequired the car signs a MeteringReceipt (SQ-10).
  • A paused session is resumed with the old SessionID (SQ-11).

Timing

LimitProfile valueCheck
Response time of most messages (V2G_EVCC_Msg_Timeout)2 sTIM-01
ServiceDetail, PaymentDetails, CertificateInstallation and Update, PowerDelivery5 sTIM-01
CurrentDemand0.25 sTIM-01
Ongoing loops (V2G_EVCC_Ongoing_Timeout)60 sTIM-02
Gap between response and next request (V2G_SECC_Sequence_Timeout)60 sTIM-03
SDP to SessionSetupRes (V2G_EVCC_CommunicationSetup_Timeout)20 sTIM-04

These values are the defaults of the limit profile and are marked for verification against the timing tables of the edition you test to. Edit them under Limits.

Sources

  • ISO 15118-2:2014, clauses and requirement numbers as cited in the text