SAE J2847: messages for smart, DC and reverse power charging
A family of SAE documents that describe what a plug in vehicle exchanges with the grid, a DC charger or a site that takes power from the car. In the field the messages on the wire are those of DIN SPEC 70121 and ISO 15118, which J2847 was harmonised with.
The parts
| Part | Subject | What it means for a capture |
|---|---|---|
| J2847/1 | Smart charging: the vehicle and the utility or energy management system exchange price, demand response and load control information | Nothing on the charging cable directly; the result reaches the car as schedules or limits in ISO 15118 |
| J2847/2 | DC charging: the messages between vehicle and off-board DC charger | The same flow as DIN SPEC 70121: CableCheck, PreCharge, CurrentDemand, WeldingDetection |
| J2847/3 | Reverse power flow: the vehicle as a distributed energy source for home or grid | Bidirectional services, which in current products run as ISO 15118-20 BPT |
Further parts exist or were planned (for example for diagnostics and for customer communication). Their numbers and status, and the revision dates of /1, /2 and /3, are to be verified against the SAE catalogue.
J2847/2 and DIN SPEC 70121
J2847/2 was written while the German and international CCS work produced DIN SPEC 70121 and ISO 15118-2. The later revision of J2847/2 was aligned with DIN SPEC 70121 so that one car can charge on chargers built to either document. The consequence for a lab is simple: a North American CCS1 capture contains DIN SPEC 70121 or ISO 15118-2 messages with their namespaces in the app handshake. There is no separate J2847 namespace to look for.
- The app handshake offers urn:din:70121:2012:MsgDef and urn:iso:15118:2:2013:MsgDef as elsewhere (HS-01, HS-02).
- The DC parameters (maximum voltage and current, target current, present values) are those of the DIN schema; the tool decodes them with the DIN module.
- Where J2847/2 describes behaviour in more detail than DIN, for example on error handling, both sides may still differ in practice; the SQ and TIM checks judge the observable behaviour.
The exact extent of harmonisation (message by message identity with DIN SPEC 70121, and which J2847/2 revision it applies to) should be verified before citing J2847/2 as equivalent in a report.
J2847/1 and J2847/3 in context
J2847/1 approaches smart charging from the utility side: it defines the information a car or its energy management needs to shift charging to a better time. ISO 15118-2 carries a similar result from the charger side as a schedule (SAScheduleList with PMax entries and optional tariffs). J2847/3 describes the car as a source; for AC discharging in North America it works with SAE J3072, which covers the grid interconnection requirements for an inverter on board the vehicle.
The relationship between J2847/3, J3072 and the utility interconnection rules (such as IEEE 1547 and UL 1741) is summarised here from secondary sources and should be verified.
Sources
- SAE J2847/1, communication between plug in vehicles and the utility grid
- SAE J2847/2, communication between plug in vehicles and off-board DC chargers
- SAE J2847/3, plug in vehicles as a distributed energy source
- SAE J2931, the communication requirements and powerline documents it relies on