Capture library
Labelled charging captures and OCPP logs made by test stacks, each checked before it is published. Download them or open them in the analyzer.
- DIN 70121 DC charging (DIN 70121): A DC session in DIN 70121 from start to stop: cable check, pre-charge, ten charge loops and welding detection.
- ISO 15118-2 AC with external identification (ISO 15118-2): An AC session in ISO 15118-2, paid by card at the charger (EIM), with ten charge loops and a normal stop.
- ISO 15118-2 AC with Plug and Charge over TLS (ISO 15118-2): An AC session in ISO 15118-2 over TLS 1.2 with Plug and Charge, from a test PKI made for this run. The key log comes with it, so the analyzer decrypts the session.
- ISO 15118-2 DC with external identification (ISO 15118-2): A DC session in ISO 15118-2 with EIM: cable check, pre-charge, ten charge loops, the stop and welding detection.
- ISO 15118-20 AC (ISO 15118-20): An AC session in ISO 15118-20: service selection, AC charge parameters, charge loops and the stop.
- Car on ISO 15118-20, charger on ISO 15118-2 (ISO 15118-20): A car that offers only ISO 15118-20 meets a charger that speaks only ISO 15118-2: the supported-app-protocol handshake finds nothing in common and the session ends before it starts.
- ISO 15118-20 DC (ISO 15118-20): A DC session in ISO 15118-20 with dynamic control: service selection, cable check, pre-charge, charge loops and the stop.
- ISO 15118-20 DC bidirectional (ISO 15118-20): A bidirectional DC session in ISO 15118-20 (DC_BPT): the car may give power back, within the limits both sides announce.
- No protocol in common (ISO 15118-2): A car that speaks only ISO 15118-2 meets a charger that speaks only DIN 70121: the handshake finds no protocol in common and the session ends before it starts.
- A charging session, OCPP 1.6 (OCPP 1.6): Boot, the card, a transaction with three meter readings a second apart, and the stop: the messages a backend bills from.
- Disconnect and reconnect, OCPP 1.6 (OCPP 1.6): Boot, then the connection drops and the charger comes back and boots again.
- A charging session, OCPP 2.0.1 (OCPP 2.0.1): Boot, the card, a transaction with three meter readings a second apart, and the stop: the messages a backend bills from.
- Disconnect and reconnect, OCPP 2.0.1 (OCPP 2.0.1): Boot, then the connection drops and the charger comes back and boots again.
- A charging session, OCPP 2.1 (OCPP 2.1): Boot, the card, a transaction with three meter readings a second apart, and the stop: the messages a backend bills from.
- Disconnect and reconnect, OCPP 2.1 (OCPP 2.1): Boot, then the connection drops and the charger comes back and boots again.