Open source in EV charging: a map

The open source projects around charging, grouped by what they do: car and charger stacks, SLAC, EXI codecs, OCPP libraries and emulators, Wireshark tools, security research tools, metering transparency and test resources, each with its language, licence and home, and what the licence families mean for reuse.

How to read this map

Much of the charging stack is available as open source: complete charger software, protocol stacks for both sides of the cable, codecs, backends, emulators and analysis tools. This page groups the projects by what they do. Charging software stacks explains where each layer runs and how a stack shows in a capture.

The licence column gives what the LICENSE file of the repository said when it was read on 30 September 2026. A repository without a licence file, or one not read, says "not confirmed" or "no licence file". Licences change between versions, and a repository can hold files under other licences than its main one, so read the files of the version you use.

Car and charger stacks

ProjectWhat it doesLanguageLicenceLink
EVerest everest-coreModular charger software under LF Energy: ISO 15118-2, -3 and -20, DIN SPEC 70121, OCPP 1.6, 2.0.1 and 2.1, drivers for hardware, meters and paymentC++Apache-2.0github.com/EVerest/everest-core
SwitchEV iso15118 ("Josev Community")EVCC and SECC for DIN SPEC 70121, ISO 15118-2 and ISO 15118-20; EVerest carries it as ext-switchev-iso15118PythonApache-2.0github.com/SwitchEV/iso15118
RISE-V2GReference implementation of ISO 15118-2 for car and charger; its README says it is no longer supported and points to JosevJavaMIT in the current repository (see the note below)github.com/V2GClarity/RISE-V2G
pyPLCCCS experiments on low cost powerline adapters: listen between a car and a charger, or act as eitherPythonGPL-3.0github.com/uhi22/pyPLC
eVDriveFlow (EDF)SECC and EVCC for ISO 15118-20 with a model of the charging process and a user interface; DC bidirectional power transfer in dynamic mode, TLS 1.3 with mutual authenticationPythonMITgithub.com/EDF-Lab/eVDriveFlow
OpenChaoJiReference implementation of GB/T 18487.1-2023 and GB/T 27930-2023, started by the China Electricity Council; EVerest holds a snapshot of the original repositoryCApache-2.0github.com/EVerest/open-chaoji
evccEnergy manager for home charging (solar surplus, tariffs), which drives wallboxes over their interfaces; not a charging communication stackGoMIT, except the sponsor-required components, which its README excludes from the MIT licencegithub.com/evcc-io/evcc

RISE-V2G was described to this research as EPL-2.0, which fits its earlier life as an Eclipse project. The LICENSE file, the README and the file headers of the V2GClarity repository say MIT. Check the licence of the release you actually use.

SLAC

ProjectWhat it doesLanguageLicenceLink
pyslacISO 15118-3 SLAC for one or more EVSEs, each bound to a network interfacePythonApache-2.0github.com/SwitchEV/pyslac
libslacISO 15118-3 SLAC as used by EVerest; archived, the work continues in the EVerest repositoryC++Apache-2.0github.com/EVerest/libslac
open-plc-utilsQualcomm Atheros tools to configure powerline modems (PIB and NVM files) and to run SLAC by handCBSD style with a patent disclaimer ("Clear BSD")github.com/qca/open-plc-utils

SLAC itself is described in Stage: SLAC matching and ISO 15118-3: powerline communication and SLAC.

EXI codecs

ProjectWhat it doesLanguageLicenceLink
libcbv2gEXI encoder and decoder for DIN SPEC 70121, ISO 15118-2 and ISO 15118-20; this analyzer embeds itCApache-2.0github.com/EVerest/libcbv2g
cbExiGenCode generator that produces libcbv2g from the XML schemasPython (generates C)Apache-2.0github.com/EVerest/cbexigen
OpenV2GEarly EXI codec and basic ISO 15118 code by Siemens, hosted on SourceForge; OpenV2Gx is a fork with a command lineCLGPL-3.0 (read in the OpenV2Gx fork; the SourceForge original not read)github.com/uhi22/OpenV2Gx
V2GdecoderCommand line and web tool that decodes EXI to XML and back, built on the RISE-V2G shared libraryJavaNot confirmed: no licence file in the repositorygithub.com/FlUxIuS/V2Gdecoder

How EXI works, and why a message decodes only against the right schema, is in EXI: how V2G messages are encoded.

OCPP libraries, backends and emulators

ProjectWhat it doesLanguageLicenceLink
Mobility House ocppLibrary for OCPP 1.6, 2.0.1 and 2.1 on both sides, with the OCA JSON schemas for validationPythonMIT; the OCPP documents in its docs folders are the OCA's, under CC BY-ND 4.0github.com/mobilityhouse/ocpp
gocppLibrary for OCPP 1.6, 2.0.1 and 2.1 with CSMS and charge point APIs; message types generated from the OCA JSON schemas; pre 1.0GoMITgithub.com/shiv3/gocpp
ocpp-goLibrary for OCPP 1.6 and 2.0.1, charge point and central systemGoMITgithub.com/lorenzodonini/ocpp-go
EVerest ocpp-csmsSimple, experimental CSMS for OCPP 1.6 and 2.0.1, built on the Mobility House library, to show the backend side of Plug and Charge (it answers a CertificateInstallationReq)PythonApache-2.0github.com/EVerest/ocpp-csms
CitrineOSModular CSMS under LF Energy, OCPP 1.6 and 2.0.1TypeScriptApache-2.0github.com/citrineos/citrineos-core
SteVeCharge point management system from RWTH Aachen, OCPP 1.2 to 1.6JavaGPL-3.0github.com/steve-community/steve
Monta ocpp-emulatorDesktop charge point emulator for OCPP 1.6 and 2.0.1, for testing a backendKotlinApache-2.0github.com/monta-app/ocpp-emulator
Solidstudio Virtual Charge Point (VCP)Terminal charging station simulator with schema validation, for load and function tests of a backendTypeScript (Node.js)Apache-2.0github.com/solidstudiosh/ocpp-virtual-charge-point
EmuOCPPOCPP 1.6, 2.0 and 2.0.1 emulator on a mininet network, with security profiles 1 to 3; companion of CheckOCPPPythonNot confirmed: no licence file in the repositorygithub.com/vfg27/EmuOCPP

How to use them for testing is in Testing OCPP implementations.

Wireshark tools

ProjectWhat it doesLanguageLicenceLink
dsV2Gshark (dSPACE)Plugin that decodes V2GTP, SDP, the app handshake, DIN SPEC 70121, ISO 15118-2 and (preliminary) ISO 15118-20, with live TLS decryption from disclosed secretsC and LuaMIT; the files that use the Wireshark API are GPL-2.0github.com/dspace-group/dsV2Gshark
wireshark-v2g (ChargePoint)Dissector for V2G traffic built on OpenV2GCGPL-2.0 for the dissector, with the OpenV2G licence referenced as a second partgithub.com/ChargePoint/wireshark-v2g
CheckOCPPOCPP JSON dissector that detects the version (1.6, 2.0, 2.0.1), validates each message against the schemas and marks the ones that failLuaNot confirmed: no licence file in the repositorygithub.com/vfg27/CheckOCPP

Security research tools

ProjectWhat it doesLanguageLicenceLink
AcCCS (Idaho National Laboratory)Emulates an EVCC or an SECC on off the shelf powerline hardware, to reach a real car or charger over the network and test it; developed mainly against DIN SPEC 70121PythonMIT (Battelle Energy Alliance), with LICENSE-Ford (MIT style) and LICENSE-Switch (Apache-2.0) for the code it builds ongithub.com/IdahoLabResearch/AcCCS
V2GInjector (Penthertz)Monitors a V2G powerline network and injects packets, presented at SSTIC 2019PythonGPL-3.0github.com/FlUxIuS/V2GInjector

Use them only on equipment you own or are allowed to test. Security testing of chargers covers how security testing of chargers is organised.

Metering transparency

ProjectWhat it doesLanguageLicenceLink
ChargyTransparency software that checks signed meter values of a charging session against the public key, for German calibration law; adapters for several vendor formats, including OCMFTypeScript (desktop app)AGPL-3.0; its README offers Apache-2.0 to supporters of the projectgithub.com/OpenChargingCloud/ChargyDesktopApp
OCMFThe Open Charge Metering Format specification of S.A.F.E. e.V., maintained in MarkdownSpecificationThe document says CC BY-ND 4.0; the repository has no licence filegithub.com/SAFE-eV/OCMF-Open-Charge-Metering-Format

What a verifier checks is in Signed meter values and OCMF.

Test resources

ProjectWhat it doesLanguageLicenceLink
ChargeX EEITPEV to EVSE interoperability test plan v2.0 with the Navigator app (The ChargeX EV-EVSE Interoperability Test Plan)Excel and PDF, Navigator in PythonNo licence filegithub.com/argonne-vci/ChargeX-EEITP
ChargeX ev-charge-seq-stateSequence diagrams and state machines: SAE J1772 PWM charging, ISO 15118-2 and ISO 15118-20 with OCPP 1.6J, 2.0.1 and 2.1PlantUMLApache-2.0, with an attribution request to Argonnegithub.com/chargex-consortium/ev-charge-seq-state
ChargeX OCPP 2.0.1 Interim KPI CalculatorComputes the four interim customer KPIs from OCPP 2.0.1 logs (ChargeX customer KPIs from OCPP logs)PythonMIT (Battelle Energy Alliance)github.com/chargex-consortium/OCPP-2.0.1-Interim-KPI-Calculator
Open-RTH (Argonne)Remote Test Harness: two boards emulate EV and EVSE and relay the high level messages over MQTT, so a car and a charger in different places can talk; stops at PreCharge and works only without TLS. Its captures read with the Open-RTH profile (Limit profiles: the numbers behind every check)C++GPL-3.0github.com/argonne-vci/Open-RTH
everest-demoReady to run demonstrations of EVerest with simulated cars, chargers and a CSMS, for interoperability and stress testsDocker Compose and shellApache-2.0github.com/EVerest/everest-demo

What the licence families mean for reuse

Open source licences fall into a few families. The short version below helps to tell them apart; it is not legal advice, and a real product decision needs the licence text and, where it matters, a lawyer.

FamilyExamples aboveWhat it asks of someone who reuses the code
PermissiveMIT, Apache-2.0, BSD styleKeep the copyright and licence notice. Apache-2.0 also asks to keep a NOTICE file, to mark changed files, and grants a patent licence. The code may go into a closed product.
Weak copyleftLGPL-3.0, EPL-2.0Changes to the library itself stay under its licence and are shared when distributed; a program that only uses the library can keep its own licence under the conditions the licence sets.
Strong copyleftGPL-2.0, GPL-3.0Whoever distributes a program built from the code distributes the source of the whole program under the same licence.
Network copyleftAGPL-3.0As GPL, and users who reach a modified version over a network are also offered its source.
No derivatives (content)CC BY-ND 4.0 (OCPP documents and schemas, OCMF, OCPI)The document may be shared unchanged with attribution; a modified version may not be shared.
No licence fileV2Gdecoder, CheckOCPP, EmuOCPP, the EEITP repositoryCopyright applies and no reuse right is granted beyond what the hosting site allows; ask the authors before copying.

A Wireshark plugin is often GPL because Wireshark is, even when the rest of the project is permissive (dsV2Gshark splits its files this way). A test tool that embeds a GPL codec may carry the same obligation when it is distributed.

Sources